MessnerMoto Motorcycle Clip-Ons CNC V2 are evolution of our design philosophy. This wonderful product is designed and CNC machined by MessnerMoto with love and passion. Recognizable, but unique, smooth and elegant design. MessnerMoto loves unique products and with this product we haven’t compromised design and functionality, thats why this product is a pretty complex to be CNC machined.
MessnerMoto Motorcycle Clip-Ons CNC V2 come with easier clamping mechanism and with ability to route the wire fully inside handlebars in order to achieve the cleanest look of the front end of your motorcycle.
Clip-Ons have 5° degree leaning angle for sport and comfortable riding positions. You can choose to utilize 5° degree built in angle in two ways. The standard option is for MessnerMoto Motorcycle Clip-Ons CNC V2 to lean downward for a more sport riding position. The second option is to install MessnerMoto Motorcycle Clip-Ons CNC V2 on Motorcycle forks in upward leaning position for more comfortable upright riding position.
With some cleaver design and CNC machining we enabled Motorcycle Switch wires to be routed inside of the Clip-Ons. Routing the wires inside Clip-Ons will achieve the cleanest look of any Motorcycle front end. This option is unique on the market and will work to its full potential with our MessnerMoto Switch V2. You can route wires/cable with diameter of up to 6mm inside of our Clip-Ons. Soldering and installation of the wires has been made as easy as it is possible.
Because we can’t predict position of your Motorcycle Switch on Clip-Ons you will need to drill a small hole where wires will enter Clip-Ons bar. The fork clipping part of MessnerMoto Motorcycle Clip-Ons CNC V2 has built in channel that goes around the forks. You can choose where the wires will exit that channel to achieve the cleanest look and hide wires completely from the sight.
We thought about usability and functionality during design phase and we did not make any compromise, full length(225mm) of MessnerMoto V2 Clip-Ons bars is usable. Some master cylinders with fixed reservoir can be tricky to install due to it getting to close to the clamping part of the clip-on. With MessnerMoto CNC Motorcycle Motorcycle Clip-Ons CNC V2 you will not have problems of fitting all the parts on to Clip-Ons bar.
MessnerMoto Clip-Ons are CNC machined out of 6061-T6 Aluminum. After CNC machining, parts are polished and fine sandblasted in order to achieve satin finish. The final step is perfect Hard Black Anodized Surface finish. Hard Black Anodized surface finish is scratch and weather resistant and will withstand environment abuse for a long time.
ECE(E) Marked
MessnerMoto CNC Motorcycle Clip-Ons V2 has the same design language like the rest of our parts. We envisioned all of our handlebar parts:
- Motorcycle Switch 2 buttons
- Motorcycle Switch 3 buttons
- Motorcycle Bar Ends CNC
- Motorcycle Clip-Ons CNC
- Motorcycle Mirror V2
- Motorcycle Master Radial CNC Cylinder
- Motorcycle CNC Throttle Single Cable
- Motorcycle CNC Throttle TWIN-Pull Cable
- Motorcycle CNC Throttle Push/Pull Cable
- Race Custom Triple Tree CNC Conversion
- Brackets for Motoscope Mini and Motoscope Pro
- Motorcycle LIGHT BRACKET FOR 5 3/4″ LED LIGHT
to be part of the same design ecosystem. Our parts, when combined together, will completely clean off your front end and make your bike stand out from the crowd.
R9T Rid. (IG) –
Looks great on my R9T
Mark Fl. –
Thanks MM. 5/5
Andy G. (IG) –
50mm Clip-Ons for my GSXR Forks conversion. Thx
Daniel S(IG) –
Package arrived, thank you.
Fred A. (IG) –
I’ve got 38.5mm version for my BMW R100. Clever clamping system.
Denis D. (IG) –
Both 35mm version for CB550. I think you are the only one on the market with the ability to make wires completly hidden.